Women’s Padded Jacket – MT100

Warm, lightweight and durable, this padded jacket helps you walk comfortably down to -5° thanks to the filling power of its technical wadding.Compact and thin, this padded jacket keeps you warm and frees up space and weight in your backpack. It is made from 70% polyester wadding.

Functions

– Inside flap under the zip that protects from the wind.
– Elasticated cuffs
– Flap at the top of the collar to protect the chin.
– Tightening with an elastic cord and toggle at the hem.

Thermal insulation – Warmth

This padded jacket, worn as a 3rd layer, has been certified for an active comfort temperature of -5°C during a standardised test in a thermal chamber.
The model is wearing a synthetic long-sleeved T-shirt and a light fleece underneath. It works with a simulated 5 km/h wind.

In our heat comparison tool, it represents 2 stars.
We have also tested this model in “static” mode; the comfort temperature is +5°C in this case.

Technical information on the wadding

We use 100% polyester wadding weighing 125 g/sqm in the body and 100 g/sqm in the sleeves and hood.

The wadding is made from silicone-coated spiral fibres that make it highly compressible and highly durable.
Despite its low thickness, it has high insulation properties thanks to the air trapped inside, and remains lightweight.

It retains its warmth even when wet.

Durable materials

This polyamide fabric that uses 20 denier thread can withstand 20,000 abrasion cycles.
Martindale test, Standard 12947-2

Outer: 100% polyamide fabric 39g/sqm, 20 denier
Lining: 100% polyester fabric 35g/sqm, mix of 15 to 20 denier threads

Water repellent property of component (not to be confused with waterproofing)

The water-repellent property of a fabric is its capacity to make water run off its surface without absorbing it.
This prevents your padded jacket soaking up water and keeps it lightweight and breathable.
The fabric is made water-repellent by treating its outer surface, however this property may deteriorate with use.

How to restore water-repellent properties?

The water-repellent treatment becomes less effective with time, washing and use.
Here is how to restore the water-repellent properties of your padded jacket!
https://www.forclaz.uk

You can also use the care product: Treatment restoring water-repellency
https://www.decathlon.co.uk/p/fabric-waterproofing-liquid-250-ml/_/R-p-308192

What is a PFC-free water-repellent treatment?

Our water-repellent treatment is PFC-free.

PFCs are used to make fabric water-repellent. By substituting PFCs with other technologies giving the same level of performance.

Do you know why the inner lining of your padded jacket is grey?

Because the fabric we use reduces CO2 emissions by 40% of the component in question.
The fabric used is innovative because it mixes a black yarn and an undyed yarn.
Compared to a classic dyeing process, this process reduces by:
• 66% fine particle emissions (PM2.5)
• 74% Eutrophication of fresh water
• 68% eutrophication of sea water

HOW TO REPAIR YOUR PADDED JACKET IF IT HAS A TEAR?

A tear on a padded jacket can happen when trekking and the good news is it can be repaired! You can either mend it or apply a heat-bonded patch so that the tear doesn’t get any bigger and the synthetic fibres escape.
Don’t you feel at ease carrying out this repair yourself? Don’t worry! Our in-store Decathlon workshops offer a repair service for your padded jackets.

Valuable advice for improving the durability of your down jacket!

In general, do not wash a down jacket too frequently because each wash decreases its thermal properties.